中国工信部高精度传感器一条龙应用计划示范项目，24H热线电话：18988775266
国家级专精特新“小巨人”企业，国家级高新技术企业！ （ENGLISH英文站）
MRQ-C油雾润滑系统Product introduction
您现在的位置：首 页 > 产品展示 > 产品详情
性能与特点
·系统设有电磁阀可加装气动调压阀，对气源进行精确控制，与润滑液充分混合雾化，减少机械刀具之损耗，冷却润滑效果更佳。
·a.PLC控制：冷却润滑时间和间歇时间由外部PLC控制
·b.无控制：冷却润滑时和间歇时间无需控制
·当冷却润滑液不足时蜂鸣器会发出报警信号、并将异常信号输出到PLC系统。
·系统建议使用气压为0.4-0.6MPa
·默认液体和气管直径6mm
·配合（MPV型）自吸式冷却润滑喷雾器使用。
the system is equipped with a solenoid valve that can be equipped with a pneumatic pressure regulating valve to precisely control the air source and fully atomize it with lubricating fluid to reduce the loss of mechanical tools and achieve better cooling and lubrication effect.
· a.PLC control: cooling and lubrication time and intermittent time are controlled by external PLC
·b. No control: no control is required for cooling and lubrication and intermittent time
· When the cooling lubricant is insufficient, the buzzer will send an alarm signal and output the abnormal signal to the PLC system.
· Air pressure of 0.4-0.6mpa is recommended for the system
· Default diameter of liquid and trachea is 6mm
· Suitable for use with (MPV) self-priming cooling and lubricating sprayer.
网站首页 | 公司简介 | 产品中心 | 技术支持 | 云顶国际yd333新闻 | 网站地图 | 联系我们 
